Com-Paint Value Pack Kit Panther Black for Ford Cars

If you have scratches on your car and wish to remove those, you have selected the right product. Our Value pack Kit, contains all the things you require to touchup those annoying car scratches and will... read more »

Vendor: Affiliate Brands
Type: Com-Paint Value Pack Kit
 
Rs. 720.00
EMI option available : View EMI Plans

Check Delivery

If you have scratches on your car and wish to remove those, you have selected the right product. Our Value pack Kit, contains all the things you require to touchup those annoying car scratches and will give you a perfect finish.

The Paint Can in the kit is computerised color matched to the Car colors available in the above list of colors and there should be no problem for you to get a perfect matching finish. There are instances, where the color might not look matching to you, but once you maintain the right distance of spraying and slowly build up coats, you will be able to EXACTLY MATCH the color by your spraying technique.

The Shade in Com-Paint is generally kept on a lighter tone so that as you coat your vehicle you can achive the darkness in shade with your coat builtup.

Don't forget to see our DEMO VIDEOS for a better understanding of the whole process of Touchup.

Highlights:
  • Quickly Dries
  • Smooth and Fine Finish
  • Can be used on other metal surfaces
  • No additional/external equipment/ product required for application.
  • Available in standard shades of various Car Brands and Models.

Kit Contents:
  • Can of Com-Paint Value Pack Kit of Selected Color (120 gm)
  • Can of Com-Merge, Finishing Solvent Spray (120 gm)
  • Tube of Com-Cut (50 gm)
  • Tube of Com-Fill (50 gm)
  • Com-Paint Rubber Applicator
  • Com-Paint Emery Pads of 400 and 2500 Grits

How to use:
  • Use in well-ventilated area, in shade & between (18°C - 30°C) temperatures for best spray results.
  • Clean the scratch area, remove any dust/ dirt/ wax polish etc.
  • Wet emery pad EP- 2500 and gently rub the scratched surface with even pressure.
  • In case of exposed metal surface or deep scratches, use Com-Fill paste to fill the scratch. Apply light coats with the help of rubber applicator to spread evenly for a uniform fill over the scratch and level other surface imperfections.
  • Level the surface and let it dry for 30 minutes.
  • Wet emery pad EP - 400 and gently rub on the surface
  • Wipe dry with a clean cloth
  • Shake Com-Paint can vigorously until Agitator Ball moves freely.
  • Hold Can straight 25 cm (12") from the surface. Spray in stroking motion to avoid dripping. Apply light coats instead of a heavy one which might make paint to sag & run.
  • Wait for 5 minutes between coats.
  • As soon as you apply the final coat of paint, Spray Com-Merge - Finishing Solvent on the outer periphery of the touched up area to dissolve the overspray.
  • Let the touched up area dry for up to 72 hours for full curing of the paint film.
  • Clean paint spray button after use. 
  • After 72 hrs, when the paint has dried completely, To give a final finish, apply a small quantity of Com-Cut to the repair area. This process would eliminate any roughness on the surface caused by dust trapped in overspray. 
  • Your process is complete when you get a smooth finish.

Precautions:
  • Do not use the product if the surface is hot to touch
  • Use masking tape only as cello tape can cause paint to be removed
  • Do not puncture the can, incinerate or store above 50° C.
  • Do not place Can on a radiator, stove, in direct sunlight or near other heat source
  • If spray gets into eyes flush with water.
  • If swallowed, do not induce vomiting, call physician. Keep out of reach of children.